Before You Start - Important Notes; Serial Numbers & Nameplate; Using The Unit Safely; Warning - Native Instruments Guitar Rig Kontrol Hardware Reference Manual

2 Before you Start – Important Notes
First things first; before using GUITAR RIG 4, it is advised that you read this chapter carefully.
2.1 Serial Numbers & Nameplate
GUITAR RIG KONTROL EDITION comes with two serial numbers. The RIG KONTROL
serial number can be found on the bottom of the hardware, along with the nameplate listing
the product model name and other technical information. The serial number for activating
GUITAR RIG 4 is located on the sleeve of the product CD.

2.2 Using the Unit Safely

Please read the following instructions thoroughly to prevent from health risks and
damaging the product.

2.2.1 Warning

To prevent hearing damage, always follow these important security advices:
►
This Product, in combination with an amplifier, headphones or speakers, can produce
sounds in decibel ranges that may cause hearing damage.
►
For protection, set all volume levels to a minimum before using the RIG KONTROL .
Gradually raise the volume controls while music is playing to set the desired
listening level.
►
Do not operate it at high volume levels for long periods. If you experience any hearing
problems or ringing in the ears, consult an audiologist immediately.
GUITAR RIG KONTROL Hardware Reference – 8