Connecting The Output - Native Instruments Guitar Rig Kontrol Hardware Reference Manual

5.4.4 Connecting the Output

The RIG KONTROL provides two mono outputs (L/R) to connect your monitoring system,
be it a mixing desk, a pair of active speakers or your home stereo. Mind that both of
them have to be connected for stereo sound. A separate stereo output (TRS) allows for
connecting your headphones.
1. Connect the output jacks to the input of your amp with its volume level completely
turned down.
2. If you are using headphones, connect them to the Phones output jack and put them
on with the headphone level fully turned down.
3. Go to the Preset Browser and select any of the presets by clicking on it. Start
playing and carefully turn up the volume of your amp or the headphone level of the
RIG KONTROL to the desired level.
You should be all set now, and ready to rock!
GUITAR RIG KONTROL Hardware Reference – 35