The Rig Kontrol Hardware; Top Panel - Native Instruments Guitar Rig Kontrol Hardware Reference Manual

3 The RIG KONTROL Hardware

This section will give you an overview of the RIG KONTROL hardware.

3.1 Top Panel

1 The footswitches can be assigned in the software to perform tasks such as stepping
through presets, or turning individual components on and off. Each switch has an LED
to indicate whether it is activated. The top row is labeled with the most frequently used
functions of GUITAR RIG 4, matching their pre-configured assignments.
2 The expression pedal can be used to control any continuous parameter of the
software, such as volume or wah-wah. There is an additional freely assignable switch
underneath the tip of the pedal.
3 Shows the number of the currently activated GUITAR RIG 4 preset.
4 This LED-Meter shows the level of the audio signal at the input. The red LEDs indicate
clipping and should never light up. Turn the according input gain down if it does.
GUITAR RIG KONTROL Hardware Reference – 10