Table of Contents
Advertisement
ASSEMBLY INSTRUCTIONS
Inspection of Parts: Take a look at each of the parts bags and compare to the Parts List (on pages 1 &
1
2). Be sure that nothing was damaged during shipment and handling. Contact Elenco Electronics if you
have any problems (phone number is on the back of this manual).
2
9V Battery Slot
(Alkaline recommended)
Battery Contact,
Battery Cover
Snap In Tab
Back of
Bottom Frame
NOTE: Slide
the contacts into
the slots and then
fold back the tabs on
the top side to hold
in place.
Battery Contacts
+ ,
Remote Control Transmitter
Note: Screw in tight.
Battery Contact, +
Battery Contact,
+
White Wire
Red Wire
-7-
Transmitter Antenna
Switch Placement
Insert the switch onto the posts. Then,
secure by melting the plastic posts with
a soldering iron.
Switch
Black Wire
Posts
Advertisement
Table of Contents
Troubleshooting
