Elenco Electronics RCC-7K Assembly And Instruction Manual page 20

Figure H
Mount the transistor with
the flat side in the same
direction marked on the
PC board.
14
Inspection:
Double check that you have installed all of your parts in
the proper places. Be sure they are not touching each
other and creating short circuits.
connections and make sure none of them are weak. Use
a magnifying glass if you have one. Check all solder
1/8"
connections for short circuits. Be thorough as it is much
easier to find and correct problems now rather than later.
-19-
(see Figure H)
Q5 - S8550 Transistor
Q6 - S8550 Transistor
Q8 - S8050 Transistor
Q2 - 9014 Transistor
Q3 - 9014 Transistor
Q7 - S8050 Transistor
Q14 - S8050 Transistor
Q12 - S8550 Transistor
Q9 - 9014 Transistor
Q10 - 9014 Transistor
Q13 - S8050 Transistor
Q11 - S8550 Transistor
Q1 - C945 Transistor
Inspect all solder