Elenco Electronics RCC-7K Assembly And Instruction Manual page 13

7
Spring for Steering
Centering
Steering
Alignment
front
Adjustment
of car
(triangular piece will
lean against this)
After inserting wire on it,
melt the top of this post
with a soldering iron to
keep the spring in place.
Turning Posts for
front wheels
Front
Wheel
Bars
Bend wires to fit around post.
They must NOT be tight (or the
steering won't work), stretch
the wire with your fingers to
loosen it if necessary.
post is towards
front of car
Front
Wheels
Note direction
of post.
Steering Bar
-12-
Between the Wires
Wires
Hammer the
bars into the
wheels, but leave a
small space so that
the turning posts
may spin freely.