LG-Nortel GDC-345H User Manual page 45

Aria 130c/130/300/600 DECT
Wireless Terminal (GDC-345H) User Guide
Press
Press # to start recording.
Press FUNCTION (
Caution: This feature should be programmed at the admin station before using.
To delete a paging message:
Press button.
Press FUNCTION (
Press
Date / Time Display
* This feature is not available in ARIA-20W & ARIA 130/300/600.
A current date and time will be displayed as;
Press button.
Press FUNCTION (
Press
Linked Station Pairs
* This feature is not available in ARIA-20W.
Two stations can be linked with each other by programming. When two stations are linked, the
following functions are supported;
When a station is busy, the other idle linked station will not receive ring for CO lines,
transferred ring or ICM calls.
If one of two linked stations receives ICM/DISA/DID calls, then the other linked station will
receive ring together.
If any one station in a linked pair goes to DND state or pre-selected message display state,
then the other goes to the same state automatically. Also, if any one station in a linked pair
comes out of these state, then the other becomes to come out.
If one of two linked station is busy, the LCD of the other station will display " IN USE AT LINK
STA ".
If you have set DND function, you should be sure that the wireless terminal be in DND state by
pressing button after setting DND function. Otherwise, because the system sends setting
information related to message of the wireless terminal about every 3 minutes, you should wait
about 3 minutes. When you canceled DND function, you should be sure that the wireless
terminal be not in DND state by pressing
same reason, too.
LG-Nortel systems
.
) button longer than 1 second or
) button longer than 1 second.
.
) button longer than 1 second.
.
button after canceling DND function for the
４１
button.
Issue 2.3