Tone - LG-Nortel GDC-345H User Manual

Aria 130c/130/300/600 DECT
Wireless Terminal (GDC-345H) User Guide

4.3 Tone

The wireless terminal supports many kinds of indication tones. These tones sound through the
buzzer installed in the wireless terminal. The situation which tone is generated is as the followings;
Keypad Tone
When pressing a key, the tone sounds.
Warning Tone and Conformation Tone
In many situations, these tones are provided as indication or warning to a user according to
each situation.
Error indication tone
When a user does invalid operation, it is generated. There is no message displayed on
the LCD.
Low battery warning tone
If battery voltage level is decreased to less than 2.3V±0.1, it is generated. A block in a low
battery icon on the LCD is blinking in every second and this tone is generated once in
every 20 second until battery voltage level reaches over 2.3V±0.1 by recharging the
battery. When a user puts the wireless terminal on the charger provided by LGE, this
tone and the blinking low battery icon are disappeared. If battery voltage level is under
2.2V±0.1V, power will be turned off automatically to protect circuits of the wireless
terminal without low battery warning tone as soon as pressing the power button to turn on
(It is called by "Auto-power-off" function). It should be recharged.
Out of range warning tone
When a user is about to get out of a coverage of the subscribed system, "OUT RANGE"
message will be shown shortly on the LCD with warning tone.
Call-connection confirmation tone
When an wireless channel between the wireless terminal and the subscribed system is
established, it is generated. Once pressing
a wireless channel. At this time, Phone(
channel is established, this tone is heard and phone(
Power-off conformation tone
When the wireless terminal is turned off, it is generated.
Ring Tone
When a wireless terminal gets an incoming call, it is generated. A user can make the
volume level up and down from level 1 to level 7 in an idle state. The incoming call ring
rhythm (CO line call and intercom call, separately) can be selected by a user among 9 ring
rhythms. The default ring rhythm is selected to normal ring rhythm. In the state that vibrator
function is enabled, when a call is reached to the wireless terminal, ring tone can't be heard
but a user recognizes the phone's ringing by phone vibration.
LG-Nortel systems
button, the wireless terminal tries to get
) icon will be blinking. When a wireless
) icon will be shown steadily.
１２
Issue 2.3