Key System Support Function - LG-Nortel GDC-345H User Manual

Aria 130c/130/300/600 DECT
Wireless Terminal (GDC-345H) User Guide

5.2.2 Key System Support Function

Call Back
When you dial to a station that is busy or in DND mode, you can leave a call back indication
message up to 5.
Call Back in case of Dialing to a Station in Busy State
After receiving intercom busy tone, press CALL BACK(
B U S Y : X X X
When the busy terminal is idle, a reserved user's terminal for call back will be ringing.
Answer the ring by pressing
Call Back in case of Dialing to a Station in DND Mode or No Answer
If you receive intercom busy tone or there is no answer after dialing to a station, press CALL
) button.
BACK(
Then, if DVU is installed in the system, a voice message is heard. Press
leave a message. If you want to stop leaving a message, press
not installed in the system, only a station message is left in the system for the called station.
A message icon is displayed in 3 minutes on the LCD of a reserved user's station for call
back.
If a call back message is displayed on the LCD, press
than 1 second and then press CALL BACK(
a message.
Answering a Message Waiting Indication
If a message is displayed on the LCD, it indicates that a message is left to you.
The first left message will be answered at first.
M S G : S T A ( X )
If DVU message has left, the first left DVU message is heard. Press HOLD (
longer than 1 second to hear the next DVU message again or press CALL BACK(
button to hear the same DVU message. After checking a message, if you want to erase the
checked message, press FLASH (
LG-Nortel systems
NOTE: If the busy station earlier goes to an idle state before
pressing button, the called station will have a message
from the system. About the message, see the below "Answer a
Message Waiting Indication".
.
Press button.
Press CALL BACK(
The station that has left a message will be ringing if a
station message has left.
button.
)
２３
) button.
button. And if DVU is
or TRANS(
)button to make a call to a station leaving
) button.
button to
) button shorter
)button
)
Issue 2.3