Page 1
Aria 130c/130/300/600 DECT Wireless Terminal User Guide MODEL : GDC-345H (GAP) LG-Nortel systems 895 Wellington Rd Rowville 3178 ABN : 22 090 723 925...
Page 2
CONFIDENTIALITY The information contained in this manual is the property of Aria Communications Pty. Ltd. Trading as LG-Nortel systems. The contents of this manual must not be copied, distributed or made available to any third party without the prior written consent of Aria Communications Pty. Limited.
1. GENERAL DESCRIPTION 1.1 Purpose The purpose of this manual is to provide the correct instructions as to the GDC-345H wireless terminal functionality and its accessories. This manual lists programming and troubleshooting techniques and explains the features of the wireless terminal as a terminal connected to the Aria 130, 300 & 600 systems (may also apply to the following discontinued systems Aria 20W, 34e, 100, 186.) The features...
Below table shows the maximum cell number, maximum registrable terminal number, and maximum simultaneous wireless call number in different configurations of ARIA- 186/100/34e/20W & ARIA 130/300/600 system and the applicable S/W version of GDC-345H handset. Please note that only one(1) WTIB(with WTIU) board can be installed in ARIA- 186/100/34e/20W system, two(2) WTIB(with WTIU) boards can be installed in ARIA 130 system and three(3) WTIB(with WTIU) board can be installed in ARIA 300/600 system.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 2.1 Wireless Terminal (GDC-345H) The GDC-345H is a DECT business wireless terminal that communicates with a ARIA- 186/100/34e/20W & ARIA 130/300/600 WOTS (Wireless Office Telephone System) via radio channels. A cell is an area effected by the antenna of a fixed part of the system. A Cell of the same wireless system is overlapped with other cells.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide A 345H-SSC is used as a charger of GDC-345H. It uses an AC 230V/50Hz adapter or a AC 220V/110V ~ 50/60Hz adapter, 330-HAP. Adapter Jack Charge Contacts Single-slot Charger (345H-SSC) The LED on the charger indicates that charging is in progress.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 330-HAP adapter is used for the charger, 340-SSC. There are two types of adapter. It is dependent on country adaptation. Type - Input : Only AC 230V/50Hz 50mA Output : DC12V 200mA 2.4VA...
Spilling or being wet may result impossible condition to be repaired. Do not remove the rubber lid attached on the left side of GDC-345H. The hole on the side part is used for ear-microphone and is covered with a rubber lid.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Do not use it in high temperature or in high humidity area. Spilling or being wet may result impossible condition to be repaired. Do not try to disassemble or alter the external or internal.
ARIA-186/100/34e/20W & ARIA 130/300/600 system. 4.1 LCD Display The LCD of GDC-345H GAP has eight icons and 2 x 12 Dot matrix. The LCD shows different wireless states and displays visual feedback for the actions performed by user.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide - Blinking : Indicates that a call connection is being tried. - Steady : Indicates that a traffic channel is established. 4.1.3 KEY LOCK Icon Icon Description Indicates that the phone is set to lock mode.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 4.1.8 SILENT MODE/VIBRATOR MODE Icon Icon Description Indicates that the phone mode is silent mode or vibrator mode. 4.2 Buttons & Functions The wireless terminal has 10 digit buttons and 10 feature buttons.
Page 15
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Button Function Description Icon - Talking Mode : Pressing shorter than 1 second : Transfer a call to the other station(TRANS). [TRANSFER/ Pressing longer than 1 second : INTERCOM/ Hold a call / release a holding call(HOLD).
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 4.3 Tone The wireless terminal supports many kinds of indication tones. These tones sound through the buzzer installed in the wireless terminal. The situation which tone is generated is as the followings;...
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 4.4 Message Display Message Description Display Duration STA xxx Station number Standby Mode INVALID Indicate not available operation 3 seconds NO CHANNEL There is no channel for connection 3 seconds CALL FAIL...
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 5. TELEPHONE FEATURES 5.1 Basic Features A subscribed wireless terminal to a ARIA-186/100/34e/20W & ARIA 130/300/600 system can use various telephone features. 5.1.1 Power ON/OFF When pressing POWER( ) button, the power is turned on and the wireless terminal goes to an idle state.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 5.2 Key System Features 5.2.1 Call Service Function The following features are available only for ARIA & ARIA series system. So these functions may not be operated properly with any other system.
Page 20
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 2) Post Dial -. ARIA-160/100/34e, ARIA 130 → CO Line Access Code (9, 8+XX or 88+XX) → Phone number → Connection ; (XX means CO line number) -. ARIA-20W → CO Line Access Code (9, 8+X or 88+X) → Phone number → Connection ;...
Page 21
1. Incoming CO ring is heard and a message is displayed on the LCD. R I N G I N G Notes: If an Ear-Mic is attached to a GDC-345H, it can receive X X X an incoming call by pressing a button on the Ear-Mic while a ring sounds.
Page 22
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide To transfer a CO line; Press TRANS( )button shorter than 1 second. Dial the intercom group number. Press button or when the called extension answers, inform the transfer and press button to complete the transfer.
Page 23
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Receiving an Intercom Call Intercom ringing → → talk Intercom ring is heard and a message is displayed on the LCD. C A L L F R O M S T A...
Page 24
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Screened Transfer When the called station answers, inform the transfer. Press button to complete the transfer. Unscreened Transfer When the called station begins to ring, Press button to complete the transfer after ring back tone is heard.
Page 25
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 1) To retrieve the call, H O L D I N G X X X Press HOLD( ) button longer than 1 second, then the held outside call will be connected. X X X X X X X X X X...
Page 26
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Call Park A user can park using CO line to CO line parking location. Call Park While connected to an outside call; Press TRANS( ) button shorter than 1 second. Dial a parking location.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 5.2.2 Key System Support Function Call Back When you dial to a station that is busy or in DND mode, you can leave a call back indication message up to 5. Call Back in case of Dialing to a Station in Busy State After receiving intercom busy tone, press CALL BACK( ) button.
Page 28
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Pick-up This function is to pick up a call instead of another subscriber who is called. It can be used after programming at the attendant station. Group Call Pick-up When you hear an unattended phone ring, Press button.
Page 29
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide STOP! If all speed bins are stored, speed bin number is displayed as ‘000’ on the LCD. You can newly edit speed bin that is already used. Using Station Speed Bin Numbers Press button.
Page 30
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Redial To Redial Saved Number, Press button. Press SPEED ( ) button shorter than 1 second. S P D _ N O Press L ( * ) S ( # ) Caution: 1) This feature doesn’t work at the intercom call.
Page 31
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Call Forward When a user can’t receive calls, a user can forward all user’s calls to another subscriber’s station. 1) ARIA-186/100/34e/20W Press button. Press Press the call forward type: Call Forward Type...
Page 32
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Dial station number, intercom group, or # for DVU where calls are to be received. (Confirmation tone will be heard.) Press button. * In case of DVU forward, recording a greeting message should be preceded.
Page 33
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Do Not Disturb (DND) When a user doesn’t want to receive a call, this function can be used. To Program Do Not Disturb (DND), Press button. Press (ARIA-186/100/34e/20W) or (ARIA 130/300/600) (Confirmation tone will be heard)
Page 34
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Authorization Code This feature is not available in ARIA-20W. To Register Access Authorization Code, To prevent unauthorized outside call (DISA access or Trunk Access), a user can lock/unlock a station with an access authorization code.
Page 35
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Temporal COS (Class Of Service) Change When a user is in a situation that a user can’t receive a call, can make a user’s station possible to make only intercom call by changing service of class. It prevents another one from making a call.
Page 36
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Call Wait / Voice Over (Camp-on) When an intercom call is busy, alerting the busy station can be done by CALL WAIT. During the conversation (internal call or CO line call), the busy station is heard alerting tone (camp-on tone) which alerting another call is waiting.
Page 37
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Answering a Call Wait with Voice Over A user hears camp-on tone. C A M P - O N X X X Press HOLD( )button longer than 1 second to connect to the second call. The first call is placed on hold. A user...
Page 38
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Step Call Call the desired intercom party. After hearing ICM busy tone, dial the last digit of desired intercom party in the same 10’s group.(e.g. If you dialed a busy station ‘112’, press to call station ‘114’.)
Page 39
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Programming a Name into Display A user can store program user’s station name. The name will be displayed instead of ICM station number on the LCD of DKTU or EKTU station. (This feature is not available in ARIA-20W.)
Page 40
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Station Program Recovery This function is to recover the previously programmed data. It will be certified by LCD display. The followings are programmed data to be recovered. 1) Station number. 2) Idle LCD message.
Page 41
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Pre-selected Messages A user can select a pre-assigned message to be displayed on the LCD of the calling terminal. (This feature is not available in ARIA-20W.) Press button. Press FUNCTION ( ) button longer than 1 second.
Page 42
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Programming User Custom Message A user may program a custom message to be displayed on the LCD of calling terminal. (This feature is not available in ARIA-20W) Press Button. Press FUNCTION ( ) button longer than 1 second.
Page 43
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide In case of using , a caller will hear the greeting message when the called part does not answer the call within a default time (4 sec.). In case of using , a caller will hear the greeting message when the called part does not answer the call within a programmed time.
Page 44
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Functions Related with VMIB – ARIA 130/300/600 Date & Time Prompt: Press button. Press FUNCTION ( ) button longer than 1 second. Press Station Number Prompt: Press button. Press FUNCTION ( ) button longer than 1 second.
Page 45
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Press Press # to start recording. Press FUNCTION ( ) button longer than 1 second or button. Caution: This feature should be programmed at the admin station before using. To delete a paging message: Press button.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 5.3 DECT Features 5.3.1 Mobility Management Function Hand-Over Once a call has been made, it is still necessary to change physical channels without release of the call. Frequency band or time slot can be changed due to quality degradation or interference, the associated base stations can be changed due to the mobility of a user in a multi-cell environment.
Page 47
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Select FP Whenever a user wants to know which systems’ the wireless terminal is subscribed to, this function can be used. Also, if a user wants to use another system instead of the system in use, this function can be used, too.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 5.3.2 Wireless Terminal Service Function These features give a user convenience to use the wireless terminal more powerfully. These features include the functions operated by each feature button and the functions operated by User Menu.
Page 49
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Ring Type Selection & Ring Volume Setting Function The intercom ring melody and the CO(outside) ring melody can be selected among 9 different types. A user can adjust the intercom ring volume level and the CO ring volume level from level 0 to level 6.
Page 50
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Direct Call A user can make a direct call at urgent state. 1) Storing / Display Function. This function is to store a direct call number. Direct call number is stored by DirectCall setting operation in main menu of User Menu.
Page 51
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Enter the desired phone number using dial button. 012345678901 23456 Press OK ( ) button. “Enter Name” message will be shown. Enter Name Edit a name according to the following table. Press a key repeatedly until a desired character or symbol is shown.
Page 52
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide To correct an edited letter during editing, Flash ( ) button, then last edited letter is deleted. The deletion takes place from right to left. For example, Enter Name Flash ( ) button make the message as the follow.
Page 53
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Using UP( ) button or DOWN( ) button, move cursor in desired number. Press button or Intercom button (INT) to make a call when a wanted name or number is found. Using Speed dial procedure.
Page 54
A user can change PIN code. The initial PIN code is 0000. Ear-Mic If an Ear-Mic, which is an optional accessory, is attached to a GDC-345H, it can receive or release a call. Press the button on the Ear-Mic to receive the call while a ring sounds, and do the same action to release the call.
Page 55
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide The User Menu consists of 7 sub-menus and each menu will be described in detail in the followings. Refer to Appendix A for menu structure. Generally each operating procedure is processed by using the following key functioned as described.
Page 56
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Press MENU(UP( ) or DOWN( ) button. Main Menu is displayed on the LCD. Press (or set ‘>’ mark to ‘1 HS Setting’ by pressing UP( ) button or DOWN( ) button and press OK button).
Page 57
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Press OK button to change the setting or press FLASH button to maintain the current setting and to return to IntRing Menu. While operating, a user can receive a call when there is an incoming call.
Page 58
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 7) Headset Ring Press MENU(UP( ) or DOWN( ) button. Main Menu is displayed on the LCD. (or set ‘ > ’ mark to ‘1 HS Setting’ by pressing UP( ) button or DOWN( ) Press button and press OK button).
Page 59
In key lock mode, all keys can’t be entered except for key-unlock procedure (MENU + SelFP (Select FP) The wireless terminal, GDC-345H(GAP), can be subscribed to up to 4 GAP systems. However, the wireless terminal can’t use all systems at the same time. Only one system selected by a user is available for using the wireless terminal.
Page 60
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide HS PIN(Handset PIN code Change Function) Press MENU(UP( ) or DOWN( ) button. Main Menu is displayed on the LCD. (Or set ‘ > ’ mark to ‘5 System’ by pressing UP( ) button or DOWN( ) button and Press press OK button).
Page 61
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Handset Reset This function is to set handset’s all setting value in default such as phone book, call log, redial number and direct call number.. Press MENU(UP( ) or DOWN( ) button.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 6. INSTALLATION OF WIRELESS TERMINAL A user should do subscription procedure to use a wireless terminal with key system. The procedure is an auto mode subscription. A user has to get only AC from the system before subscription processing.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 6.2 Subscription This procedure is for subscribing the wireless terminal to ARIA-186/100/34e/20W & ARIA 130/300/600 WOTS system. To Subscribe GAP, VOLUME At the Attendant Station, + ## + Flex. Button 1 + Station No.
Page 64
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide MENU(UP or DOWN) key + 5 + 1 + PARK + REDIAL( ) + AC code + REDIAL( + OK ( ) key FT # GDC-345H U N R E G I S T E R E D 1) Press MENU(UP( ) or DOWN( ) button.
Page 65
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide MENU(UP or DOWN)key + 5 + 1 + REDIAL( ) + AC code + REDIAL( FT # + OK ( ) key GDC-345H U N R E G I S T E R E D 1) Press MENU(UP( ) or DOWN( ) button.
Page 66
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide S T A X X X S U B S C R I B I N G S E A R C H I N G Note 1 : According to the system or radio channel environment, the system or the wireless terminal may not recognize that the system has the subscribed wireless terminal or the wireless terminal is subscribed to the system.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 6.3 De-subscription - I De-subscription makes a wireless terminal loose access right to the ARIA-186/100/34e/20W & ARIA 130/300/600 WOTS. To de-subscribe the wireless terminal, it should be in an idle state. To De-subscribe;...
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 6.4 De-subscription - II Warning There is another way to de-subscribe locally. The subscription data of the wireless terminal (stored in MPB and WTIB or the wireless terminal) should be erased separately at both sides. The, you should be more careful in doing this procedure.
Page 69
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide (2) To De-subscribe locally in the wireless terminal; £ª ££ At the Wireless Terminal, MENU(UP or DOWN)key + 5 + 2 + PIN Code + OK key + (To select FP#)+ OK key 1) Press MENU(UP or DOWN) button.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 6.5 Authentication The process by which the identity of a user of the wireless terminal is checked by the system. The User Personal Identification (UPI), manually entered by a user, is used for user authentication.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 6.6 Change of Subscribed System The wireless terminal may have subscription information for 4 systems at the same time. The last subscribed system information or the subscribed system information which is selected as the following steps is only available system information currently.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 7. TROUBLESHOOTING GUIDE Problem Reason Solution Check the battery then, press the LCD is empty. No power [PWR] button. “NO CHANNEL” is displayed when pressing [ON/OFF] No free channel Wait until a free channel is released.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide 8. SPECIFICATIONS 8.1 System Specification Standard: DECT / GAP Frequency band: 1880~1900MHz Typical distance from a base station to a wireless terminal: 70 meters Items 2. Max. Cell 4. Registrable 5. Max.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Appendix. A USER MENU TREE Vibr/Ring M el ody ExtR ing Vol um e Menu Key HS Setting Melody IntR ing Key Lock Volume KeyTone B uzzer Select BS C hrg A ns.
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Appendix. B Function Short-Key Table Function Short-Key Table related to Key System Call Service * ARIA-186/100/34e FEATURE INPUT KEY Call Transfer (During a call) [TRANS] + STA # + ON/OFF( Call Waiting/Camp On ) + STA # + (if busy tone is heard) ...
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Appendix. C The LCD Messages Related To a Call The followings describe messages displayed on the LCD of an attendant station and the wireless terminal in Talking Mode. VOLUME At the DKTU,...
Page 81
Aria 130c/130/300/600 DECT Wireless Terminal (GDC-345H) User Guide Description : While the wireless terminal is desubscribed at the attendant station, the desubscription processing is really failed in MPBCOMM, DPS or WHTU. £ª ££ At the Wireless Terminal, (1) NO CHANNEL Description : There is not enough system resource.