Table of Contents
Advertisement
ELECTRONIC CLOCK & AUTOMATIC OVEN
AUTO COOKING PROGRAMMES
There are two Auto Cooking programmes that can be selected using your timer:–
(a) To set the timer to switch the oven(s) On and Off Automatically
(b) To set timer to switch on immediately and OFF automatically after a set cook period.
a) TO SET THE TIMER TO SWITCH THE OVEN(S) ON AND OFF AUTOMATICALLY
This allows you to cook at a specified time for a chosen period before the oven
switches off Automatically.
Step 1 Check that the correct time of day is set, if not follow instructions for setting the
time of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
Cooktop Symbol
Minute
Cook
End
Time Manual
Minder
Period
A
U
T
O
A
U
T
O
Minute
Cook
End
Time Manual
Minder
Period
A
U
T
O
Minute
Cook
End
Time Manual
Minder
Period
Minute
Cook
End
Time Manual
Minder
Period
TIMER OPERATION
Step 3 Press and hold in the Cook Period button.
The display will read 0.00 with the cookpot (
Step 4 With the Cook Period button still held in, set the required Cook
Period using the "+" and "–" buttons.
Release the buttons and the timer display will revert to the time of day
with the Auto symbol and Cookpot (
Step 5 Press and hold in the "End Time" button.
The display will read the earliest possible end time for the Cook
Period that you have set above.
The Auto symbol and Cookpot (
Step 6 With the End Time button still held in, use the "+" and "–"
buttons to set the "End Time" (i.e. The time you require the oven
to switch off).
Release all the buttons and the timer will revert back to the time of day.
The "Auto" symbol will remain lit to signify that an Auto Cooking
Programme has been set. The (
Step 7 Turn the oven control(s) to the required temperature, and if
necessary select the appropriate oven function.
Note: If your appliance has two ovens: When the timer has been
set for one oven it is possible to use the other oven only during the same
Automatic programme.
At the end of the Automatic Cook Period the Auto Symbol will flash and
an intermittent bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless
cancelled. The "Auto" symbol will continue to flash until the timer is
returned to Manual operation (see below).
Step 8 Press the Manual button to cancel the bleeping sound. (If 2
minutes has not elapsed).
Step 9 Turn the oven control(s) to the OFF position.
Step 10 Press the manual button again to return the oven(s) to Manual
Operation. (The Auto symbol will go out)
) symbol lit.
) symbol lit.
) symbol lit.
) symbol will go out.
9
Advertisement
Table of Contents
