Spartan
owner's manual
body-pack transmitter troubleshooting
Problem
Power LED does
not illuminate after
switching on
LCD shows "Err" or
garbled information
Distorted Sound
17
Solution
• Verify batteries are good
or charged and inserted
correctly
• Restart transmitter
• Remove batteries and re-
insert them
• Low charge on Spartan
battery (Plug in AC power
supply and recharge)
• Low microphone/trans-
mitter battery (Replace or
charge batteries)
• Interference (Change
wireless channel)
• Intermittent interference
(Change wireless channel
selection)
• Auxiliary input overload-
ing (Reduce volume on
input device)
• Check sensitivity position
on microphone
• Exceeding range or inter-
fering objects (Improve
wireless microphone
transmission condition)
contact
If your problem persists
and this guide has not
resolved the issue, call our
customer service depart-
ment for additional assis-
tance. (800) 588-0018
Need help?
Do you have a question about the Spartan and is the answer not in the manual?