Christie LHD700 User Manual page 64

Setting
Simple mode
This function decides whether to activate the simple mode.
Off . . . Simple mode function is off.
On. . . . Only the simple mode buttons are active.
Note:
W arning icon and Simple mode : On message appear
on the screen for about 4 seconds when press the
button which is not the simple mode button.
Remote control
The eight different remote control codes (Code 1- Code 8)
are assigned to the projector; the factory-set, initial code
(Code 1) and the other seven codes (Code 2 to Code 8).
The same code should be set on both the projector and
the remote control. For example, operating the projector in
Code 7, the remote control code also must be switched to
Code 7.
To change the code for the projector:
Select a remote control code in this Setting Menu.
To change the code for the remote control:
Press and hold the MENU button and a number button
(1-8) on the remote control for more than five seconds to
switch among the codes. See "Remote Control Code" on
page 16.
Note:
• When different codes are set on the projector and on
the remote control, no operation can be made. In that
case, switch the code on the remote control to fit the
code on the projector.
• I f the batteries are removed from the remote control
for a long period of time, the remote control code will
be reset.
RC sensor
Select a location of the infrared remote receiver of the
remote control. See "Remote Control Receivers and
Operating Range" on page 15 for details.
Both .... Activate both the front and back receiver.
Front ... Activate only the front receiver.
Back .... Activate only the back receiver.
62
Simple mode buttons
Only these buttons are
active when the simple
mode is set to On. [ON,
STAND-BY, SHUTTER,
INPUT, MENU, AUTO
PC, SCREEN, SELECT
(Mouse Pointer
included), L-CLICK,
R-CLICK, P-TIMER,
POINTER, PIP, ON-OFF
switch] Number buttons
(p.14) also become
active only when setting
the remote control codes
numbers or entering the
PIN code numbers (pp.
56, 66).
020-000422-01 Rev.1 (11-2011)
LHD700 User Manual