Christie LHD700 User Manual page 44

Computer Input
Offset (Red/Green/Blue)
Press the Point ◄ button to lighten red/green/blue tone of
the black level of an image; press the Point ► button to
deepen red/green/blue tone of the black level of an image.
Auto picture control
Use the Point ◄► buttons to select the desired Auto
picture control option (Off, L1 or L2).
Off ............... Auto picture control OFF position.
L1 ................ Auto picture control LEVEL 1 position.
L2 ................ Auto picture control LEVEL 2 position.
Advanced color*
Use the Point ◄► buttons to select the advanced color
mode.
Off ............... Advanced color mode is Off.
Auto ............ Advanced color according to the type of
image.
Sharpness
Press the Point ◄ button to decrease the sharpness
of the image; press the Point ► button to increase the
sharpness of the image (from 0 to 31).
Gamma
Use the Point ◄► buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select yes. All adjustments will return to their previous
figures.
Store
To store the adjusted data, select Store and press the
Point ► or the SELECT button. Use the Point ▲▼ buttons
to select one from Image 1 to 10 and press the SELECT
button.
A confirmation box appears and then select yes. Stored
data can be called up by selecting an Image (1-10) in the
Image Level Selection on page 39.
42
* This function controls the operation
of the Color Control Devic, which
independently and automatically
regulates the amount of yellow light
passing through the LCD panel, to
accurately reproduce both image color
and image brightness. Normally leave
Auto (default setting).
Note:
• White balance may change depending
on the image.
Store
A confirmation box appears
and then select yes.
020-000422-01 Rev.1 (11-2011)
LHD700 User Manual