Mirror Mode; Primary Monitor Mode - Belkin Dual Video Docking Stand User Manual

CONNECTION AND INSTALLATION PROCEDURES
Connection and
Installation Procedures

Mirror Mode

1. Refer to the "Multi-Monitor Mode" section to open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.
3. Mirror the desktop across to the additional display:
• Select "Multiple Displays > Extend these displays" on Window 8
and Windows 7
• Uncheck the "Extend the Desktop onto this monitor" box on
Windows Vista
• Check the "Extend my Windows Desktop onto this Monitor" box on
Windows XP/Windows 2000
4. Note: For Mac OS X or greater, navigate to "Settings > Display >
Arrangement," select the applicable monitor, and check the box labeled
"Mirror Displays."
5. Click "Apply" to confirm and close the settings screen.
USB 3.0 Dual Video Docking Stand for Ultrabooks and MacBook® Computers
SECTIONS
1 2 3 4 5

Primary Monitor Mode

1. Refer to the "Multi-Monitor Mode" section to open the configuration page.
2. In the Display drop-down menu, select the preferred monitor.
3. Check the "Make this my main display" box on Window 8/Windows 7/
Windows Vista, or "Use this device as the primary monitor" box on
Windows XP/Windows 2000.
Note: Some PCs and laptops may need to disable the main display (i.e.,
uncheck the "Extend the desktop onto this monitor" or "Extend my
Windows desktop onto this monitor" boxes for the main display) as part of
the same settings change.
4. Click "OK" to confirm and close the settings screen.
Note: For Mac OS X or greater, navigate to "Settings > Display >
Applications," grab the white bar on the primary display, and drag it to the
extended display you wish to be the new primary display.
12
6 7