Play From Bluetooth-Enabled Devices; Connect A Device - Philips SB365 User Manual

4 Play from
Bluetooth-
enabled devices
With this product, you can listen to audio from
Bluetooth-enabled devices.

Connect a device

Note
•
Make sure that your Bluetooth device is compatible
with this speaker.
•
Before pairing a device with this speaker, read its user
manual for Bluetooth compatibility.
•
The speaker can memorize a maximum of 4 paired
devices.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
Any obstacle between this speaker and a Bluetooth
device can reduce the operational range.
•
Keep away from any other electronic device that may
cause interference.
Connect a device manually
Note
•
The operational range between this speaker and a
Bluetooth device is approximately 10 meters (30 feet).
1
Press on the speaker.
» The Bluetooth indicator
flash.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
(refer to the user manual of the device).
3
When [Philips SB365] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password "0000".
EN
6
begins to
» After successful pairing and connection,
the speaker beeps twice, and the
Bluetooth indicator turns solid blue.
To disconnect the Bluetooth-enabled device:
• Press and hold
• Disable Bluetooth on your device; or
• Move the device beyond the
communication range.
To reconnect the Bluetooth-enabled device:
• For a paired Bluetooth device on which
the automatic reconnection is enabled,
this product reconnects with it once it is
detected.
• For a paired Bluetooth device that does
not support the automatic reconnection,
reconnect it with this product manually.
To connect another Bluetooth-enabled device:
• Disable Bluetooth on the current device,
and then connect another device.
Connect a device through NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1
Press on the speaker.
» The Bluetooth indicator
flash.
2
Enable the NFC feature on your Bluetooth
device (see the user manual of the device
for details).
3
Touch the NFC tag on the speaker with
the back of your Bluetooth device.
for 3 seconds;
begins to