Get Started; Power Supply; Turn On - Philips SB365 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Power supply

Either AC power or battery can be used as
power supply of this product.
Option 1: Battery power
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine, or fire. Never discard batteries in fire.
•
Batteries contain chemical substances, so they should
be disposed of properly.
Note
•
Batteries are not supplied with the accessories.
To install the batteries:
1
Open the battery compartment.
2
Insert 4 AA batteries with correct polarity
(+/-) as indicated.
3
Close the battery compartment.
Option 2: AC power
Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the speaker.
•
Risk of electric shock! When you unplug the AC
adapter, always pull the plug from the socket. Never
pull the cord.
Connect the power adaptor to:
• the DC IN socket at the back of the
speaker.
• the wall outlet.

Turn on

Press .
» The speaker switches to Bluetooth
mode.
» The Bluetooth indicator begins to flash.
Switch to standby mode
The speaker switches to standby mode in the
following situation:
• Press again;
• The connection with Bluetooth device or
other device is invalid for 15 minutes; or
• Music playback is stopped for 15 minutes.
EN 5