Table of Contents
Advertisement
1
In stop mode, press PROG to activate the
program mode.
» [PRG] (program) and [001 PR 01] are
displayed.
2
For MP3 tracks, press
album.
3
Press
/
to select a track, and then
press PROG to confirm.
4
Repeat steps 2 to 3 to program more
tracks.
5
Press
to play the programmed tracks.
» During play, [PRG] (program) is
displayed.
To erase the program
Press
twice.
Play from Bluetooth-enabled
devices
Note
•
The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•
Any obstacle between the system and the device can
reduce the operational range.
•
Compatibility with all Bluetooth devices is not
guaranteed.
/
to select an
Philips BTM3360
1
Press to select the Bluetooth source.
» [Bluetooth] (Bluetooth) is displayed.
» The Bluetooth indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'Philips BTM3360' on your
Bluetooth enabled device and if necessary
input '0000' as the paring password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the product beeps twice.
4
Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this product.
•
If you fail to search for "Philips
BTM3360'' or cannot pair with this
product, press and hold
for three seconds until the Bluetooth
indicator flashes blue quickly to enter
pairing mode.
Tip
•
The product can memorize up to 8 previously
connected Bluetooth devices.
PIN
0000
/PAIRING
EN
13
Advertisement
Table of Contents
