Installing And Starting The Software; Items To Prepare; Install The Software - Canon SELPHY CP810 User Manual

Installing and Starting the Software

Windows 7 and Mac OS X 10.7 are used for these explanations.

Items to Prepare

Computer
O
Supplied CD-ROM (SELPHY CP810 Solution Disk)
O
A commercially available USB cable shorter than 2.5 m (8.2 ft.) (SELPHY terminal requires a Mini-B
O
connector)
1
2
28
(p. 2)

Install the software.

Windows
Place the CD-ROM in the computer's CD-ROM drive
O
and click [Easy Installation] when the screen on the left
appears.
Follow the on-screen instructions to proceed.
O
If the User Account Control window appears, follow the
O
on-screen instructions to proceed.
Proceed with the installation to display the screen on the
X
left.
Macintosh
Insert the CD-ROM in the computer's CD-ROM drive.
O
Click [Finder] in the Dock (the bar at the bottom of the
desktop) and double click [
If is displayed on the desktop, you can also double-
O
click to display files in the CD-ROM.
When the screen on the left appears, click [Install] and
O
follow the on-screen instructions to proceed.
When the installation finishes, click [Finish] to restart the
O
computer and complete the installation.
Prepare SELPHY.
Turn off SELPHY and remove the memory card or USB
O
flash memory.
Insert an ink cassette and a paper cassette that contains
O
paper you want to use into SELPHY
] in the CD-ROM.
(pp. 7 – 10).