Canon SELPHY CP810 User Manual page 29

3
Commercially available USB cable
4
5
Windows
If the screen in Step 5 does not appear, open it from the [Start] menu r [All Programs] r
O
[Canon Utilities] r [SELPHY Photo Print] r [SELPHY Photo Print].
Macintosh
If the screen in Step 5 does not appear, follow the procedure below to register your printer.
O
Select [
& Fax screen. Click [+] to select [CP810] from the pop-up window, then click [Add].
After you have finished registering your printer, click the [SELPHY Photo Print] icon from the
Dock (the bar at the bottom of the desktop) to display the screen for Step 5.
SELPHY may not operate correctly if it is connected to a computer via a USB hub.
O
SELPHY may not function properly if other USB devices (with the exception of a USB mouse
O
or USB keyboard) are used at the same time. Disconnect any other USB devices from your
computer and then reconnect SELPHY.
Do not put your computer into standby mode (or sleep mode) while SELPHY is connected to
O
the computer's USB port. If you accidentally do so, awaken the computer from standby mode
without disconnecting the USB cable. When you cannot awaken the computer properly, restart
the computer.
For details on handling the computer, refer to the user guide included with your computer.
O
Connect SELPHY to the computer.
O
O
Turn on SELPHY.
O
Windows
O
Confirm that the software has been started
properly.
X
O
] from the menu, and click [System Preferences] r [Print & Fax] to open the Print
Use the USB cable to connect SELPHY to the computer.
Refer to the user guides included with the cable and
computer for handling instructions.
Press the q button to turn on SELPHY.
When the installation finishes, click [Restart] to restart
the computer and complete the installation.
The software will start and the screen on the left will
appear when communication between SELPHY and the
computer is established.
Perform Steps 2 to 4 to automatically start the software
the next time.
29