Connecting To A Website; What To Do If You Cannot Connect To A Website; Starting The Crws Software - Cisco SOHO 71 Installation Manual

Chapter 2 Installation

Connecting to a Website

What to Do If You Cannot Connect to a Website

Starting the CRWS Software

Step 1
Step 2
Step 3
78-10432-04
The router has been configured to work for the most common type of installation.
Log onto a PC connected to the router, open a web browser, and connect to a
website. If you connected to a website, you have completed setup and can
continue to use the router.
If you cannot display a website, make sure that the broadband modem or Ethernet
switch that the router is connected to is operating, and try again. If you still cannot
connect to a website, you must follow the steps in
Connect to a Website."
If you cannot connect to the Internet using the factory configuration, or if you
have loaded new Cisco IOS software on the router since you installed it, you can
configure the router, using the Cisco Router Web Setup (CRWS) software. The
CRWS software is already loaded on the router, and is run from a PC connected
to the router.
Follow these steps to start the CRWS software:
Start, or restart, a PC connected to one of the router's Ethernet ports (1, 2, 3, or
4).
Open a web browser. Make sure that the browser is set to work in online mode.
• In Internet Explorer, click the File menu, and verify that the "work offline"
option is unchecked.
In Netscape, the default selection in the File menu is set to work online.
•
Type in the following universal resource locator (URL):
http://10.10.10.1
Cisco 806 Router and SOHO 71 Router Hardware Installation Guide
Connecting to a Website
"What to Do If You Cannot
2-17