Cisco SOHO 71 Installation Manual page 39

Chapter 2 Installation
The following conditions must be met when you mount the router:
•
•
•
To mount the router, follow the steps in
provides a template for measuring the distance between the screws.
78-10432-04
Because you will use the LEDs as status and problem indicators, the front
panel must face upward and be easily visible.
The router must be mounted low enough for you to see the LEDs in case you
need to troubleshoot a problem.
The power supply must rest on a horizontal surface such as the floor or a
table. If the power supply is not supported, it might place strain on the power
supply cable and cause it to disconnect from the connector on the router back
panel.
Cisco 806 Router and SOHO 71 Router Hardware Installation Guide
Mounting Your Router
Figure 2-8. The last page of this manual
2-15