Chapter 2
Installation
Table 2-3
Verifying Operation
Power/Link
Power
To hub, server, PC,
or workstation
connected to
ETHERNET port 4
To servers, PCs, or
workstations
connected to
ETHERNET port 1,
2, or 3
To broadband
modem or Ethernet
switch
Mounting Your Router
78-10432-04
LEDs to Check
OK
COMPUTERS 4,
COMPUTERS RXD, and
COMPUTERS TXD
COMPUTERS 1, 2, or 3,
COMPUTERS RXD, and
COMPUTERS TXD
INTERNET 1, INTERNET
RXD, AND INTERNET
TXD
You can mount your router on one of the following surfaces:
Table or other horizontal surface
•
Wall or other vertical surface
•
Cisco 806 Router and SOHO 71 Router Hardware Installation Guide
Normal Patterns
On
COMPUTERS 4 is on when the Ethernet port
•
is physically connected to a hub, PC, or
workstation.
COMPUTERS RXD blinks when an Ethernet
•
port receives an Ethernet packet.
COMPUTERS TXD blinks when an Ethernet
•
port sends an Ethernet packet.
COMPUTERS 1, 2, or 3 is on when the
•
Ethernet port is physically connected to a
server, PC, or workstation.
COMPUTERS RXD blinks when an Ethernet
•
port receives an Ethernet packet.
COMPUTERS TXD blinks when an Ethernet
•
port sends an Ethernet packet.
INTERNET 1 is on when the INTERNET
•
ETHERNET port is physically connected to
a broadband modem or Ethernet switch.
INTERNET RXD blinks when the
•
INTERNET ETHERNET port receives an
Ethernet packet.
INTERNET TXD blinks when the
•
INTERNET ETHERNET port sends an
Ethernet packet.
Mounting Your Router
2-13