3. Connect a new mouse to the appropriate connector on the computer. Your mouse might be connected
to a PS/2 mouse connector
mouse, see "Locating connectors, controls, and indicators on the front of your computer" on page 4
or "Locating connectors on the rear of your computer" on page 5.
Figure 22. Mouse connectors
Completing the parts replacement
After completing the installation or replacement for all parts, you need to reinstall the computer cover and
reconnect cables. Depending on the parts you installed or replaced, you might need to confirm the updated
information in the Setup Utility program. Refer to Chapter 6 "Using the Setup Utility program" on page 37.
To reinstall the computer cover and reconnect cables to your computer, do the following:
1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left
inside your computer. See "Locating components" on page 7 for the locations of various components in
your computer.
1
or a USB connector
2
. Depending on where you want to connect your
.
Chapter 5
Installing or replacing hardware
33