Control Panels; Control Settings - Hotpoint NLL113 Owner's Manual And Installation Instructions

About the control panel.
You can locate your model number on the label on the front of the left side of the door opening.
Model NLL113
2
Model NVL333
2
About the control settings.
NOTE: Not all features are available on all dryer models.
IMPORTANT: Clean the lint filter each time you use the dryer.
Automatic cycles automatically determine fabric dryness. Select LESS DRY if you want your clothes slightly damp
1
at the end of the drying cycle. Select MORE DRY if you want them to feel drier.
Drying Cycles
COTTONS For cottons and most linens. For most loads select OPTIMUM DRY.
WRINKLE FREE For wrinkle-free, permanent press and delicate items, and knits.
FLUFF Provides no-heat tumbling for freshening or fluffing already dry clothing, fabric, linens and pillows.
2
Start
—Close the dryer door. Turn the START control clockwise to START. Hold for 1–2 seconds and release.
Opening the door during operation will stop the dryer. To restart the dryer, close the door and
select START to complete the cycle.
NOTE: Drying times will vary according to the type of heat used (Electric, Natural or LP gas), size of
load, types of fabrics, wetness of clothes and condition of exhaust ducts.
Hotpoint.com
OFF
LESS
DRY
1
1
5