Selecting The Print Settings - Canon HG10 Instruction Manual

o
IMPORTANT
• If
=
continues to flash (for more than 1
minute) or if i j does not appear, the
camcorder is not correctly connected to
the printer. In such case, disconnect the
USB
cable and turn off the camcorder
and the printer. After a short while, turn
them on again, set the camcorder to
I
PLAY' 0
I mode and restore the
connection.
• During the following operations, even if
you connect a printer to the camcorder
it will not be recognized.
- Erasing all still images
- Erasing all transfer orders
- Erasing all print orders
CD
N()"f~~
_
•
~
will appear for images that cannot be
printed.
• We recommend powering the
camcorder using the compact power
adapter.
• Refer also to the printer's instruction
manual.
Printing with the ~ "'" (Print/Share)
Button
You can print a still image without
changing the settings simply by
pressing
[!g,
N' J .
78
1 Press .... or
~
to select the still
image you wish to print.
2
Press
I.ld. ""I·
• Printing starts. The .Q,
oN
button
flashes and stays on when the
printing is completed.
• To continue printing, press .... or
~
to select another still image.
Selecting the Print Settings
You can select the number of copies
and other settings for printing. The
setting options vary depending on your
printer model.
Options
[PAPER]
['D
PAPER SIZE]
Available paper sizes vary depending on the
printer model.
[
~
PAPER TYPE]
Select [PHOTO], [FAST PHOTOj, [PLAIN] or
[DEFAULn.
[I®
PAGE LAYOUT]
Select [DEFAULT] or one of the following
available page layouts.
[BORDERED]: Prints the whole image area almost
exactly as the recorded still image.
[BORDERLESSj: Enlarges the center portion of
the still image to fit the width/height ratio of the
selected paper size. The top, bottom and sides of
the still image may be slightly trimmed out.
[2-UP], [4-UP], [8-UP], [9-UP], [16-UP]: Refer to
the sidebar on page 79.
o
IMPORTANT
• If
=
continues to flash (for more than 1
minute) or if i j does not appear, the
camcorder is not correctly connected to
the printer. In such case, disconnect the
USB
cable and turn off the camcorder
and the printer. After a short while, turn
them on again, set the camcorder to
I
PLAY' 0
I mode and restore the
connection.
• During the following operations, even if
you connect a printer to the camcorder
it will not be recognized.
- Erasing all still images
- Erasing all transfer orders
- Erasing all print orders
CD
N()"f~~
_
•
~
will appear for images that cannot be
printed.
• We recommend powering the
camcorder using the compact power
adapter.
• Refer also to the printer's instruction
manual.
Printing with the ~ "'" (Print/Share)
Button
You can print a still image without
changing the settings simply by
pressing
[!g,
N' J .
78
1 Press .... or
~
to select the still
image you wish to print.
2
Press
I.ld. ""I·
• Printing starts. The .Q,
oN
button
flashes and stays on when the
printing is completed.
• To continue printing, press .... or
~
to select another still image.
Selecting the Print Settings
You can select the number of copies
and other settings for printing. The
setting options vary depending on your
printer model.
Options
[PAPER]
['D
PAPER SIZE]
Available paper sizes vary depending on the
printer model.
[
~
PAPER TYPE]
Select [PHOTO], [FAST PHOTOj, [PLAIN] or
[DEFAULn.
[I®
PAGE LAYOUT]
Select [DEFAULT] or one of the following
available page layouts.
[BORDERED]: Prints the whole image area almost
exactly as the recorded still image.
[BORDERLESSj: Enlarges the center portion of
the still image to fit the width/height ratio of the
selected paper size. The top, bottom and sides of
the still image may be slightly trimmed out.
[2-UP], [4-UP], [8-UP], [9-UP], [16-UP]: Refer to
the sidebar on page 79.