20-522b.fm Page 56 Thursday, September 7, 2000 9:41 AM
Locking Out Talk Group IDs
Note: You can only lock out talk group IDs when the
scanner is in the closed mode (see "Open and Closed
Modes" on Page 57).
1. Press
.
PGM
2. Press
.
TRUNK
3. Press
,
or
FUNC
4. Press
or
to select the ID memory.
5. Press
to lock out the ID.
L/OUT
6. To remove the lockout from a trunking ID, manually
select the ID memory, and press
appears.
Reviewing Locked-Out Talk Group IDs
Note: You cannot clear all lockouts from a talk group at
the same time.
1. Press
then
PGM
TRUNK
2. Press
then
FUNC
L/OUT
If the ID memory bank has no locked out ID, you
hear the low beep tone.
3. Press
then
FUNC
Or, just press
or
out IDs in a bank.
Clearing Talk Group IDs
1. Press
then
PGM
TRUNK
2. Press
,
or
FUNC
3. Press
then
FUNC
CL
Clearing All Talk Group IDs in One Bank
You can clear all talk group IDs within a bank. This lets
you quickly delete all talk group IDs from a bank (for ex-
ample, if you want to use the bank to store a different set
of talk group IDs).
56
Trunking Operation
to move the desired bank.
L
appears.
until
L/OUT
.
. The locked out ID appears.
or
to select a search bank.
to search for any locked
.
to select ID memory.
.
dis-
L