Locking Out Talk Group Ids; Unlocking A Single Talk Group Id; Unlocking All Talk Group Ids - Radio Shack PRO-94 Owner's Manual

Locking Out Talk Group IDs

Many municipal and commercial services use trunk
systems to transmit signals from such devices as water
meter transmitters, door alarms, and traffic signals.
Some signals are encrypted, as well, and most are not
voice signals. Since all these are assigned IDs just like
other users, you may want to lock out reception of
these ID signals. You can lock out up to 100 IDs at one
time.
Note: If you lock out an ID while searching, it is also
locked out of the scan list(s). See "Using Talk Group ID
Lists" on Page 52.
To lock out an ID, press
pears. The ID is locked out, and the next active ID ap-
pears.

Unlocking a Single Talk Group ID

1. Hold down
beeps.
2. Repeatedly press W or V to select the ID you want
to unlock.
3. Press
L-OUT (S/S)
next locked ID appears.
4. Press
SRC (LIMIT)
ously selected function.

Unlocking All Talk Group IDs

Hold down
L-OUT (S/S)
two short beeps, then press
IDs at once. The scanner beeps twice. Press
to resume the search.
Note: When you unlock all the IDs, the scan list ap-
pears. Press
lists or press
SRC (LIMIT)
ously selected function. For more information about
scan lists, see "Using Talk Group ID Lists" on Page 52.
50
L-OUT (S/S)
L-OUT (S/S)
. The ID is unlocked, and the
to resume the scanner's previ-
while searching until you hear
to scan the IDs stored in your scan
SCAN
to resume the scanner's previ-
when the ID ap-
until you hear two short
to unlock all the
E (SVC)
L-OUT/SS