Table of Contents
Advertisement
20-522b.fm Page 51 Thursday, September 7, 2000 9:41 AM
Notes:
--
• If you select
scanner does not scan trunked frequencies.
Instead, you see:
• If you programmed a Motorola Type I or Hybrid
system, see "Programming Fleet Maps" on
Page 53.
3. Press
to enter the program mode.
PGM
4. Store the trunking frequencies into subsequent
channels in the same bank (see "Storing Known
Frequencies into Channels" on Page 30).
5. Repeatedly press
MODE
—
LT
for EF Johnson,
the EDACS (GE/Ericsson) system.
6. Press
. If the scanner's receive mode matches
SCAN
the ID mode,
T
appears and the scanner scans the
frequencies.
Programming Motorola Trunking Systems
(UHF-Lo)
You can program the scanner to receive transmissions
in the UHF-Lo band (380–512 MHz) of the Motorola
trunking system. You can receive these transmissions
by:
• Checking the trunking system's control channel.
You must program the system's base frequency and
offset frequency to do this.
• Decoding the subaudible data transmitted with the
signals. When you do this, the scanner might detect
wrong IDs but you can easily receive trunking fre-
quencies without programming the base and offset
frequencies.
Trunking Operation
instead of
,
, or
LT
MO
ED
to select the trunking mode
MO
for Motorola, or
ED
, the
for
51
Hide quick links:
Advertisement
Table of Contents
