Tpm Header - ASROCK IMB-184-PY User Manual

1. High Definition Audio supports Jack Sensing, but the panel wire on
the chassis must support HDA to function correctly. Please follow the
instruction in our manual and chassis manual to install your system.
2. If you use AC'97 audio panel, please install it to the front panel audio
header as below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for HD audio panel only. You don't
E. To activate the front mic.

TPM Header

(19-pin TPM1)
(
see p.8, No. 28)
SMB_DATA_MAIN
ATX Power Input/Output Connector
(4-pin INT_DC1)
(see p.8 No. 3)
PS2 Keyboard/Mouse Header
(8-pin PS2_KB_MS1)
(see p.8 No. 2)
3W Audio AMP Output Wafer
(4-pin SPEAKER1)
(see p.8 No. 26)
need to connect them for AC'97 audio panel.
Go to the "FrontMic" Tab in the Realtek Control panel. Adjust
"Recording Volume".
48MHz
GND
SERIRQ#
S_PWRDWN#
GND
LAD1
LAD2
SMB_CLK_MAIN
GND
1
12V
12V
1
This connector supports a
+5V Trusted Platform Module (TPM)
GND
system, which can
+3.3V STANDBY
securely store keys, digital
LAD0
certificates, passwords, and
+3.3V
LAD3
data. A TPM system also helps
PCIRST#
enhance network security,
FRAME
PCICLK
protects digital identities, and
ensures platform integrity.
Please connect a DC 24V
GND
(IMB-184-PY) / DC 12V
(IMB-184) power supply to this
connector.
GND
Signal Signal
PIN PIN
Name Name
8 GND 6 GND
7 MSCLK 5 MSDATA
1
19
Signal Signal
PIN PIN
Name Name
+5V +5V
4 2
STANDBY STANDBY
3 KBDATA 1 KBCLK
PIN Signal Name
4 SPK R-
3 SPK R+
2 SPK L+
1 SPK L-