Radio Operation; Preset Stations; Select A Band; Automatically Store Stations - Jensen CD3010X Operation Manual

Radio Operation

Select a Band

Press BAND button to change radio
between three FM bands and two AM
bands. Each band stores up to six
BAND

preset stations.

Tuning
VOL
SEL
VOL
>3 Sec
VOL
SEL
VOL
<3 Sec

Automatically Store Stations

Select six strong stations and store
1
them in the current band.
1. Select a band (if needed).
BAND
2. Press AS/PS button for more
than three seconds. The new
stations replace stations
2
AS/PS
already stored in that band.
>3 Sec

Preset Scan

Scan stations stored in the current
1
band.
1. Select a band (if needed).
BAND
2. Press AS/PS button for less
than three seconds. Radio
pauses for ten seconds at
2
AS/PS
each preset station. Press
AS/PS again to stop scanning
when desired station is
<3 Sec
reached.
Manual Tuning
Press a << or >> button
for more than three
seconds to move radio
frequency number up or
down one step.
Seek Tuning
Press a << or >> button
for less than three second
to move to next station
automatically.
Preset Stations
Six numbered preset buttons store and recall
stations for each band.
1 2
Store a station:
1. Select a band (if needed).
1
BAND
2. Select a station.
2
VOL
SEL
VOL
3. Hold a preset button for three
3
3
3 Sec
( ST )
RDM
Band
Recall a station:
1. Select a band (if needed).
1
2. Press a preset button to
BAND
2
( ST )
L
Scan
Press SCAN to scan through strong
SCAN
stations in the current band. Radio pauses
for five seconds at each strong station.
Press SCAN again to listen to current
station.
3 4 5 6
seconds. Preset number will
appear in the display.
BASS
PROGRAM
CH
Preset Station Number
select stored station.
RDM PROGRAM BASS
CH
3