Remote Commands - Radio Shack Digital Telephone Answering Device Owner's Manual

43-3801.fm Page 24 Friday, April 21, 2000 9:25 AM

Remote Commands

Press:
1#
Play new messages.
2# Play all messages.
3# Delete current message.
4# Repeat previous message.
5# Stop and exit.
6# Skip a message.
7# Turn off/on the TAD. (If the
TAD is off, it will turn on and
answer after about 10 rings.
Then you can turn it off and
on again with this command.)
8#
Record an OGM.
9# Record a memo.
Note: If you do not have CPC service and you hang up while
the TAD is playing back the messages, the TAD might not rec-
ognize that you hung up. If someone calls while the TAD contin-
ues to play the messages, the caller hears a busy signal. We
recommend that you stop and exit remote commands until the
TAD beeps once before you hang up.
24
To: