Connecting The Tad To A Phone Line - Radio Shack Digital Telephone Answering Device Owner's Manual

43-3801.fm Page 8 Friday, April 21, 2000 9:25 AM
Replace the battery when the LOW BATT indicator flashes
while the TAD is connected to AC power.
Warning: Dispose of the old battery promptly and properly. Do
not burn or bury it.
Cautions:
• To avoid losing stored information, be sure the AC adapter
is plugged into an AC outlet before you replace the battery.
• Always remove the old or weak battery. Batteries can leak
chemicals that can destroy electronic parts.
CONNECTING THE TAD
TO A PHONE LINE
Select a location for the TAD that is near both a telephone jack
and an easily accessible AC outlet, and out of the way of normal
activities.
Notes:
• If the phone line jack is not a modular jack, you must
update the wiring. You can convert the wiring yourself,
using jacks and adapters available at your local
RadioShack store. Or, you can let the phone company
update it.
• The USOC number of the jack to be installed is RJ11C.
8