Brother P-Touch 3600 User Manual page 22

Ch. 2 Getting Started
Installing the P-touch Editor 3.2
software
The P-touch Editor 3.2 software includes a vari-
ety of more complex functions for printing bar-
codes and images, enabling you to design just
about any label that you can image. Install the
P-touch Editor 3.2 software onto a PC as
described below.
NOTE
Do not connect the P-touch to the computer before
installing the software, otherwise it may not be
installed correctly. Be sure to connect the P-touch
only when you are instructed to do so.
To install the P-touch Editor 3.2 software
1 Insert the enclosed CD-ROM into the com-
puter's CD-ROM drive. A dialog box auto-
matically appears, allowing you to the
select the language of the Installer.
NOTE
If the dialog box does not automatically appear,
double-click "My Computer" on the desktop, and
then double-click the CD-ROM drive containing
the CD-ROM. (For Windows
puter" in the Start menu, and then double-click the
CD-ROM drive containing the CD-ROM.) Next,
double-click "Setup.exe" to display the dialog box.
2 Select the desired language, and then click
the OK button.
12
®
XP, click "My Com-
3 Click the upper button (P-touch Editor). The
®
InstallShield Wizard for installing the
P-touch Editor software starts up, and then
the Welcome dialog box appears.
NOTE
To install just the printer driver, click the lower
button (Driver). The first Driver Setup dialog box
appears, allowing you to select whether the P-
touch will be connected through the USB port or
the RS-232C port. Continue with the procedure
in Installing the USB printer driver on page 16.
(To install the serial printer driver, refer to the
Advanced Functions booklet.)
To install the P-touch Quick Editor software,
click the middle button (P-touch Quick Editor).
Continue with the procedure in Installing the
P-touch Quick Editor software on page 14.
4 Carefully read the contents of the Welcome
dialog box, and then click the Next button
to continue. The User Information dialog
box appears.