Using Smartshare - LG P940 Prada User Manual

1. I I n Idle mode, open the
application list and select
Settings > Wireless & network
> Wi-Fi Direct settings > OK >
Wi-Fi Direct.
2. Press Menu
3. Select a device and then select
Connect. When the owner of
the other device accepts the
connection, pairing is complete.
4. To deactivate the WLAN Direct
feature, select Disconnect Wi-Fi
Direct.
NOTE:
Forced G/O mode(Forced
Group owner mode) – Touch
44
to activate group owner mode,
which enables the legacy Wi-Fi
devices to connect by scanning
your phone. In this case you
must enter the password that
is set in the Menu > Advanced >
Password.
Send data via a WLAN
1. Select a file or item, such as
a memo, media file, or web
address, from an appropriate
application or My files.
2. Select an option for sending
data via a WLAN. The method for
selecting an option may vary by
> Scan.
data type.
3. Search for and select a WLAN
device.
Receive data via a WLAN
When prompted, select OK to
confirm that you are willing to
receive data. Received data is
saved to the ShareViaWifi folder.

Using SmartShare

SmartShare uses DLNA (Digital
Living Network Alliance)
technology to share digital content
through a wireless network.
Both devices must be DLNA
certified to support this feature.
To turn SmartShare on and allow
sharing contents
1. Touch Applications tab
select SmartShare.
2. Press the Menu key and select
Settings.
3. Touch Discoverable checkbox to
turn on.
• Touch Always accept
request if you would like to
automatically accept sharing
requests from other devices.
• Touch Receive files if you
would like to automatically
and