Timer Recording - Topfield SBP-2000 User Manual

7.1.2 Timer recording

While a recording is going on, you can play back one of the
recorded programmes.
list, press the
Program menu. See
recorded programme list.
You can set a programme to be recorded at a specific time.
Even if the digital receiver is in standby mode, it will switch
into active mode and start recording at a specified time. When
the recording comes to the end, the digital receiver will switch
back into standby mode again in one minute. However, if you
press any button on the remote control or on the front panel
even just one time, the digital receiver will not switch into
standby mode.
7.1 Recording a programme 59
To stop recording, press the
button; then a box like the
left figure appears, which shows
the programme currently being
recorded.
using navigation buttons then
press
recording.
To view the recorded programme
button or alternatively select the Recorded
§7.2 for detailed description about the
Select recording by
£
¢ ¡
button to stop the
OK