Table of Contents
Advertisement
46 Recording and Playing
7.1.2 Timer recording
To additionally record another service, switch to the service
you want to record, and press the
Once a recording is started, it is put on the recorded programme
list even though it is not finished yet. The recording file is
named after its service name with a suffix of a number. To
view the recorded programme list, press the
natively select the File List menu.
See §
7.2
for detailed description about the recorded pro-
gramme list.
You can set a service to be recorded at a specific time. Even
if the digital receiver is in standby mode, it will switch into
operation mode and start recording at a specified time. When
the recording comes to the end, the digital receiver will switch
back into standby mode again in one minute. However, if
you press any button on the remote control or on the front
panel even just one time, the digital receiver will not switch
into standby mode.
To stop recording, press the
button; then a box like
the left figure appears, which
shows programmes currently be-
ing recorded. If you select one,
its recording will stop.
While a recording is going on,
you can watch or record another
service.
button.
button or alter-
Advertisement
Table of Contents
