Formatting The Hard Disk - Topfield SBP-2000 User Manual

70 Recording and Playback

7.5 Formatting the hard disk

NOTE
This digital receiver supports only version 3.x, 4.x, 5.x, and
6.x of the Divx format.
If a new hard drive is installed, it must be formatted because
you can neither record nor use time-shift with an unformatted
hard disk.
You can delete permanently all contents stored in a hard drive
by formatting it. Select the Installation > System Recovery >
Format Hard Disk menu, and then select the hard drive you
want to format. To format the built-in hard drive, select the
option to Internal; otherwise to format the external hard drive
which is connected to the digital receiver, select the option to
External. With pressing the
firmation. Formatting will start with the choice of Yes.
NOTE
The hard drive on the digital receiver will be formatted in
the NTFS file system.
£
¢ ¡
button, you get asked for con-
OK