Options For On-Screen Display - Topfield SBP-2000 User Manual

4.7 Options for on-screen display

video, then you can synchronise them by adjusting the value
of the Sync option. In addition, you can change the colour and
size of subtitle by setting the Font Color and Font Size options
to one you prefer.
To adjust the transparency level of the OSD, set the OSD Trans-
parency option as you desire. Its available range is 0 to 50 per-
cent.
To adjust the display time of the information box, set the Info
Box Display Time option as you desire. Its available range is
1 to 30 seconds. If you set this option to No Info Box, the in-
formation box will not be displayed when you switch services.
However, pressing the
box. If you set this option to Never Hide, the information box
will always be displayed. For the information box, see §5.2.3.
In addition, you can raise or lower the position of the infor-
mation box. Set the Info Box Position option as you desire. Its
available range is
tion, the lower the information box will be positioned.
If any service's name is too long to fit the width of the service
name column on the services list screen, you can get it to scroll
by setting the Text Scroll option to anything other than Disable.
4.7 Options for on-screen display 41
To set the options for the on-
screen display (OSD), select the
Settings > OSD menu.
should see a screen like the left
figure.
button will display the information
10 to +3 lines. The higher you set the op-
You