Table of Contents
Advertisement
Bluetooth SETUP
Bluetooth Setup Operation
The following steps I to 5 are common to the various
Bluetooth functions. For details, refer to each individual
function.
• When placing or receiving a call or streaming audio from
the Bluetooth device, Bluetooth Setup operation cannot be
performed.
• Refer to the Owner's Manual of the CD Head Unit or
Digital Media Receiver, and set "BLUETOOTH IN" or
"BT IN" to ADAPTER, and then perform Bluetooth
SETUP operation.
1
Press and hold SETUP for at least 2
seconds.
2
Turn the
Rotary encoder
or the
Double
Action encoder
to select the desired
setting items and press ENT.
Setting items:
BT IN
H
PAIR DEVICE*'
H
VISIBLE MODE*'
H
AUTO ANSWER*'
H
CLEAR DEVICE*'
H
SERVICE NAME*J/*2
H
MIC INPUT*'
H
SPEAKER SELECT*'
H
FW VERSION*'
H
FWUPDATE*'
*'
When "BLUETOOTH IN" or "BT IN" is set to
ADAPTER, the above items are displayed.
*2 Only for CDA-105 Series.
3
Turn the
Rotary encoder
or the
Double
Action encoder
to change the settings and
pressENT.
4
Press and hold ESC (or SETUP) or
~
for at
least 2 seconds.
The SETUP mode
is
canceled.
setting
the
.BluetOothpevice
Select one of 5 connected Bluetooth compatible devices that
you previously registered (the fifth registered by guest
mode*).
Setting item: PAIR DEVICE
Turn the
Rotary encoder
or the
Double
Action encoder
to select a Bluetooth
compatible device you want to use (you want to
change connection), and then press ENT.
• If
the connection is successfully changed, "CONNECTED"
or "CONNECT" is displayedfor 2 seconds, and then the
display returns to the SETUP screen.
• If
you input the wrong passcode or communications fail,
"FAILED" is displayed.
4.EN
• When a mobile phone is paired with the unit, up to 1,000
telephone numbers will automatically be obtained in the
telephone book (PHONE BOOK). Also, when the mobile
phone is reconnected, new information on the mobile
phone will automatically be updated.
• Depending on the connected mobile phone, the telephone
book (PHONE BOOK) may not be automatically obtained.
If
the telephone book cannot be automatically obtained, it
can be manually transferred to the adapter by referring to
the Owner's Manual of the mobile phone.
• If
you want to connect another Bluetooth compatible
device, after disconnecting the current Bluetooth
compatible device, connect the Bluetooth compatible
device you want to change to.
The PIN code is fixed as "0000".
*
Guest mode:
Use this mode for a temporary pairing. Registration (in
guest mode) is canceled once the ignition key goes from
ACC to off.
setting the Search U()de
You can set whether the KCE-400BT can be recognized or
not from a Bluetooth compatible device. Normally set this to
ON.
Setting item: VISIBLE MODE
ON:
Enable recognition of the KCE-400BT from the
Bluetooth compatible device.
OFF:
Disable recognition of the KCE-400BT from the
Bluetooth compatible device.
• Depending on the mobile phone, it may be necessary to
input a passcode. For inputting the mobile phone's
passcode, refer to the mobile phone's Owner's Manual.
When a call is received, you can set whether to answer it
automatically or not.
Setting item: AUTO ANSWER
ON:
When a call is received, it is answered
automatically after about
5
seconds.
OFF:
When a call is received, it is not answered
automatically. Press ../
or \..
to
receive
the
call.
• If the received call setting on the mobile phone is on, the
call will be answered automatically even though this
setting is set to OFF.
Advertisement
Table of Contents
