Table of Contents
Advertisement
Connecting to a VGA display device
The port replicator can also be connected to an external VGA display device, such as a monitor or a
projector, through the external monitor port.
To connect an external VGA display device:
1.
Connect the device cable to the external monitor port on the back of the port replicator.
2.
If using Windows 7, press
the external display device.
NOTE:
Refer to Help and Support for more information.
NOTE:
NOTE:
do not close the computer display while the computer is connected to an external display device.
You can modify lid switch settings through the computer power options.
NOTE:
The port replicator does not support viewing Blu-ray and other protected content on a display
device connected to the external monitor port on the port replicator.
8
Chapter 2 Using the port replicator
fn+f4
If you are not using Windows 7, the computer will automatically detect the external device.
To use extended display, refer to the operating system display settings of the computer.
If the computer lid switch is set to initiate Standby or Sleep when the display is closed,
on the computer one or more times to switch the screen image to
Advertisement
Table of Contents
