Security And Data Management; Lock The Device; Memory Card Security - Nokia E72 User Manual

Hide thumbs Also See for E72:
Table of Contents

Advertisement

Security and data management

Manage the data and software on your device, and take care
of the security of the device and its contents.
Important: Your device can only support one antivirus
application. Having more than one application with antivirus
functionality could affect performance and operation or
cause the device to stop functioning.

Lock the device

The lock code protects your device against unauthorised use.
The preset code is 12345.
To lock the device, in the home screen, press the power key,
and select
Lock
phone.
To unlock your device, select Unlock, enter the lock code, and
select OK.
To change the lock code, select
Settings
and
General
>
Enter the old code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and digits
can be used, and both uppercase and lowercase alphabets
are possible.
Keep the new lock code secret and separate from your device.
If you lose the lock code, you must take the device to a Nokia
authorised service facility. To unlock the device, the software
120
Menu
Ctrl. panel
>
Security
Phone and SIM
>
must be reloaded, and the data you have saved in the device
may be lost.
You can also lock the device remotely by sending a text
message to the device. To enable remote locking, and to
define the text for the message, select
panel
Settings
>
SIM card
Remote phone locking
>
remote lock message, and confirm the message. The message
must be at least 5 characters long.

Memory card security

Select
Menu
>
You can protect a memory card with a password to prevent
unauthorised access. To set a password, select
Memory card password
8 characters long and is case-sensitive. The password is
stored in your device. You do not need to enter it again while
>
card.
you use the memory card on the same device. If you use the
memory card on another device, you are asked for the
password. Not all memory cards support password
protection.
To remove the memory card password, select
Memory card password
password, the data on the memory card is not protected
against unauthorised use.
Menu
and
General
Security
>
> Enabled. Enter the
Office
File
mgr..
>
> Set. The password can be up to
> Remove. When you remove the
© 2009 Nokia. All rights reserved.
Ctrl.
>
Phone and
>
Options
>
Options
>

Advertisement

Table of Contents
loading

Table of Contents