Charge The Battery - Nokia E72 User Manual

2. If the device asks for a PIN code or lock code,
enter it, and select OK. The preset lock code is
12345. If you forget the code and your device is
locked, your device will require service and
additional charges may apply. For more
information, contact a Nokia Care point or your device
dealer.
To switch off the device, press the power key briefly, and
select Switch off!.

Charge the battery

Your battery has been partially charged at the factory. If the
device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger plug to the device.
3. When the device indicates a full charge, disconnect the
charger from the device, then from the wall outlet.
You do not need to charge the battery for a specific length of
time, and you can use the device while it is charging. If the
battery is completely discharged, it may take several minutes
18
before the charging indicator appears on the display or
before any calls can be made.
Charging with the USB data cable
Charging with the USB data cable is slower than charging with
the charger. Charging with the USB data cable may not work
if you use a USB hub. USB hubs may be incompatible for
charging a USB device.
When the USB data cable is connected, you can transfer data
at the same time as charging.
1. Connect a compatible USB device to your device using a
compatible USB data cable.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select from the available USB
modes.
© 2009 Nokia. All rights reserved.