Horizon Fitness EX-76 User Manual page 9

A S S E M BLY ST E P 2
CONSOLE MAST
CONSOLE MAST BOOT CONSOLE MAST BOOT
TOP CAP
A) Open HARDWARE BAG FOR STEP 2.
B) Slide the CONSOLE MAST BOOT followed by the TOP CAP over the CONSOLE MAST.
C) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D) Attach the sides of the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (B), 4 SPRING WASHERS (C) and 4
FLAT WASHERS (D).
E) Attach the front of the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (B), 2 SPRING WASHERS (C) and 2
ARC WASHERS (E).
F) Slide TOP CAP and CONSOLE MAST BOOT down to seal the console mast hole.
HARDWARE BAG FOR STEP 2 CONTENTS :
BOLT (B)
15 mm
Qty: 6
CONSOLE MAST
CONSOLE WIRE
TOP CAP
SPRING WASHER (C)
15.4 mm
Qty: 6
ARC WASHER (E) ARC WASHER (E)
FLAT WASHER (D) FLAT WASHER (D)
SPRING WASHER (C)
CONSOLE WIRE
MAIN FRAME MAIN FRAME
FLAT WASHER (D)
20 mm
Qty: 4
SPRING WASHER (C)
BOLT (B) BOLT (B)
ARC WASHER (E)
17 mm
Qty: 2