Read Speed Control For Cd-R Data Cd - LG GCE-8520B Owner's Manual

Read Speed Control for CD-R Data CD

The basic default reading speed for CD-R disc media in this drive is 40X. The Read
Speed Control will allow you to select the maximum read speed (52X) for CD-R media,
simply by pressing the eject button. Note that this function is only available with a
CD-R data disc.
To enable 52X CD-R read speed, follow the chart below:
Flow Chart
Operation
Open the Disc Tray
Load CD-R Disc
Close Disc Tray
Initialize 52X READ
CAUTION:
The quality of CD-R data disc varies significantly from brand to brand (or brandless),
as well as disc condition used over time. A disc that is poorly balanced or that may
have cracks in it greatly increases the chance of disc failure or disc shatter when being
read back at speeds higher than 40X, possibly causing damage to the drive.
Closely inspect discs you plan to use in the drive for any abnormalities or cracks.
If you hear strange noise or sounds from the drive during operation, this could be a
sign of an unbalanced or damaged disc and it should be removed immediately.
LG Electronics does not warranty drive damage caused by faulty or shattered discs.
The LED indicator turns on for 3 seconds.
The 52X maximum read speed for this CD-R disc has been enabled.
Ejecting this disc or turning off the PC will disable the 52X maximum
read speed function.
The drive will default back to the 40X CD-R read speed.
14
User instruction
(Push Eject / button)
(Put CD-R disc on Tray)
(Push and hold the eject
than 3 seconds)
button for more