Horizon Fitness EX-66 User Manual page 7

A S S E M BLY ST E P 1
CONSOLE MAST
CONSOLE MAST BOOT
A) Open HARDWARE BAG FOR STEP 1.
B) Slide the CONSOLE MAST BOOT followed by the TOP CAP over the CONSOLE MAST.
C) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D) Attach the sides of the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4
FLAT WASHERS (C).
E) Attach the front of the CONSOLE MAST to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2
WAVY WASHERS (D).
F) Slide CONSOLE MAST BOOT down to seal the console mast hole.
HARDWARE BAG FOR STEP 1 CONTENTS :
BOLT (A)
15 mm
Qty: 6
CONSOLE MAST
CONSOLE WIRE
CONSOLE MAST BOOT
TOP CAP TOP CAP
SPRING WASHER (B)
Qty: 6
WAVY WASHER (D) WAVY WASHER (D)
FLAT WASHER (C)
SPRING WASHER (B)
CONSOLE WIRE
MAIN FRAME
FLAT WASHER (C)
20 mm
Qty: 4
FLAT WASHER (C)
SPRING WASHER (B)
BOLT (A) BOLT (A)
MAIN FRAME
WAVY WASHER (D)
17 mm
Qty: 2
angle view