12. Connect the other SAS signal cables to port 1 on the ServeRAID expansion
If you have other devices to install or remove, do so now. Otherwise, go to
"Completing the installation" on page 112.
84
System x3690 X5 Types 7147, 7148, 7149, and 7192: Installation and User's Guide
Cable ties
Microprocessor
air baffle
SAS signal cable
adapter to port 0 on the drive backplane; then port 2 on the expansion
adapter to port 1 on the drive backplane, port 3 on the expansion adapter to
port 2 the drive backplane, and port 4 on the expansion adapter to port 3 on
the drive backplane (depending on the drive backplane you install in the
server).
Cable tie
loops
SAS signal
cable guide
Scalability
connector
cover
Adapter