Media Card Reader/Audio Board - HP EliteBook 8730w Maintenance And Service Manual

Media card reader/audio board

Description
Media card reader/audio board
Before removing the media card reader/audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Keyboard (see
c. Switch cover (see
d. Display assembly (see
e. Top cover (see
Remove the media card reader/audio board:
1. Remove the three PM2.5×4.0 screws that secure the board to the system board (1).
2. Lift the back of the board up, and then lift it from the system board (2).
Reverse this procedure to install the media card reader/audio board.
Battery on page 41).
Keyboard on page 55)
Switch cover on page
Display assembly on page
Top cover on page 78)
59)
70)
Component replacement procedures
Spare part number
493978-001
81