Camera Module - HP EliteBook 8730w Maintenance And Service Manual

Camera module

Description
Camera module (includes flex cable)
Before removing the camera module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the following components:
a. Battery (see
b. Keyboard (see
c. Switch cover (see
d. Display (see
Remove the camera module:
1. Loosen the tape (1) that secures the camera cable to the display enclosure.
2. Disconnect the camera flex cable from the camera board (2).
3. Use a flat-bladed screwdriver to loosen the camera module from the clips in the display enclosure,
and then pull the module and cable through the opening near the top of the enclosure (3).
76 Chapter 4 Removal and replacement procedures
Battery on page 41)
Keyboard on page 55)
Switch cover on page
Display assembly on page
59)
70)
Spare part number
494030-001