Bluetooth Module - HP EliteBook 8730w Maintenance And Service Manual

Bluetooth module

Description
Bluetooth module (includes Bluetooth module cable)
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the Bluetooth module:
1. Position the computer upside down with the front toward you.
2. Lift the back of the Bluetooth compartment cover up, and then lift the cover up and off the computer
(1).
NOTE:
494020-001.
3. Lift and remove the Bluetooth module (2) from the compartment by lifting it straight up.
4. Disconnect the Bluetooth module cable (3) from the Bluetooth module.
Reverse this procedure to reassemble and install the Bluetooth module.
48 Chapter 4 Removal and replacement procedures
Battery on page
The Bluetooth compartment cover is available in the Plastics Kit, spare part number
41).
Spare part number
398393-002